Menu (866) 665-1829

Push – Pull Streamer System™

Welding Smoke Removal:
Ideal for Manufacturing Facilities with Large Parts

image3How the Clean Air Streamer™ Works

The Clean Air Streamer™ is an ambient air filtration unit that is completely self-contained unit and requires ZERO duct work, making install and maintenance quick and easy.  The Clean Air Streamer™ is the ideal system for large parts manufacturers or those using overhead cranes where a source capture system is either not feasible or can be very costly.  This system can also be used as a second level of defense to ensure optimum filtration for welding smoke and dust applications.  Usually used in pairs, the Clean Air Streamer™ uses a push-pull system to push dirty air towards a unit allowing it to be drawn in and cleaned before being returned to the facility.

This system continuously moves clean, filtered air around the facility preventing the formation of a welding smoke layer.  A louver on the top of the unit takes the clean, filtered air and pushes it back into the facility to create a stream of clean air.  This stream of air also pushes the dirty, smoky air towards a second unit that draws the air in via an inlet located in the middle of the unit.  A series of metal baffles and metal mesh helps prevent any sparks that may be present from reaching the cartridge filters.

The system creates a “wall” of air movement from one side of a plant to the next, continuously cleaning the air.


The Clean Air Streamer™ can be combined with the Clean Air Smart Panel™ that, depending on applications and needs, can include the Clean Air LEAF™ (Low Energy Air Filtration) system that will let you experience upwards of 50% less energy used in your equipment.

image4Why Clean Air Streamer™?

  • Reduces worker exposure levels: smoke, grinding dust, and other production pollutants are collected and cleaned efficiently through modular air filtration systems
  • Covers all worker elevations: This type of modular system prevents a false ceiling of smoke and fume from forming, so workers at different elevations are protected.
  • It requires almost zero footprint, no duct work is necessary and it reduces installation costs
  • Slashes energy costs: Returns clean air to within the building, thereby reducing expenses associated with makeup air helping to slash gas and electric costs

installationspotlight button quality industries  application spotlight button streamer for lippert


The Clean Air Streamer™ can be installed with legs, wall mounted, or hanging from the ceiling to reduce floor footprint.



  • Welding Smoke
  • Dust Based
  • Fumes
  • Large Production


  • Lowers overall energy costs
  • Can be placed against a wall, hung from ceiling, or placed on legs
  • Covers entire space from floor to ceiling
  • No duct work needed, reducing installation costs
  • Cleans and reuses same air, so no make up air needed

Quick Specs

  • Two Models Available: Model 4 (4 Filters) and Model 6 (6 Filters)
  • 260 sq. ft. media, each filter
  • Total sq. ft. of media: 1,560 for Model 6 and 1,040 for Model 4
  • 10 HP (Model 6) and 7.5 (Model 4) HP Motor
  • Air Volume: 5,000 CFM (Model 4); 6,000 CFM (Model 6)
  • Three Phase; 208, 240, or 460 Volt, 15A-33A
  • Flame Retardant 80/20 Cellulose/Polyester Media Filters


  • Nanofiber Filters
  • VFD (Variable Frequency Drive)
  • Clean Air Fire Suppression System
  • Hopper and Dust Bin
  • Legs

Product Submittals

CAA Streamer Model 4

CAA Streamer Model 6